The Extrel RGA is a reliable, easy-to-use residual gas analyzer that includes full range pressure measurement. It is the best performing RGA at an affordable price, which makes the system an ideal choice for background gas analysis, leak detection and vacuum chamber characterization.
The Extrel RGA is available in two (2) mass ranges, 1 to 100 amu or 1 to 300 amu. The system comes standard with a Faraday detector or an optional dual Faraday/Electronic multiplier detector.
The Extrel RGA utilizes RS-232C or USB communication with Windows® XP or 7 operating systems. The software is powerful and easy to use.
The RGA100 and RGA300 are the ultimate RGA measurement probes. A single device, mounted on a 2-3/4” inch flange, contains a Pirani gauge, an ion gauge, and a quadrupole mass analyzer. An intelligent start-up design allows for the system to know when to switch from the Pirani to the ion gauge, and finally to the quadrupole system. All Extrel models start at 1 amu. The RGA100 goes to 100 amu and the RGA300 goes to 300 amu.
Dual thoria-coated filaments are used for electron emission for both the quadrupole and ion gauge operation. The filaments are protected against stress from vacuum excursions by both the ion and the Pirani functions. Our RGA will outlast filaments in conventional RGA units. When a filament eventually does burn out, the second filament will allow for normal operation until filaments are replaced.
The RGA units come standard with a Faraday cup detection system. With the Faraday cup alone, the partial pressure measurements from 10-4 and 10-11 torr may be made. With the multiplier option, this sensitivity is extended down to 5 x 10-14 torr. The novel ion current amplifier detects ion currents from 10-6 to 10-15 amps in a single scan. This huge dynamic range allows for very large and very small peaks to coexist on one scan.
Mass Filter Type
Minimum Detectable Partial Pressure:
Maximum Operating Temperature
Total Pressure Measurement
Electron Emission Current
Minimum Tube I.D.